discontinued 1/10 Mini Cooper 94 Monte Carlo M05 Kit

This part is discontinued and we no longer carry it.

Manufacturer

Part number

TAM58483

Real-time inventory

Out of stockClick to refresh

Price

$225.00

Sale -$85.01

$139.99

This part is discontinued and we no longer carry it.

Description

This is the radio controlled, electric powered, 1/10 scale
Mini Cooper '94 Monte-Carlo kit with the M-05 Chassis from Tamiya.

FEATURES:

Chassis: M5 resin monocoque design, composite construction with
extensions to build a short, medium or long wheelbase chassis
Drive: Front wheel
Shocks: Plastic body friction type
Shock Towers: Composite construction
Motor: 540 size
Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541
Gearbox: Sealed, integral with chassis
Transmission: Single speed, ball bearing equipped
Differential: Three bevel gear
Body: Polycarbonate, Mini Cooper
Suspension: Four wheel independent double wishbone
Tires: Treaded 60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter
with foam inserts
Wheels: Plastic, two sets, eight-spoke, one set matte gold finish,
one set matte silver finish, 0.94" (24mm) wide, 1.5" (38mm)
diameter
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Three piece tie-rod linkage

YOU WILL RECEIVE:

M-05 chassis, tires, wheels, foam inserts, Mini Cooper body, decals,
20 tooth pinion gear, shocks, ESC, motor and instruction manual

REQUIREMENTS:

Radio: 2-channel
AA Batteries: 8 for transmitter
Battery: 6-cell stick with standard connector
Battery Charger: Peak type recommended
Building and track equipment

SPECIFICATIONS:

Vehicle;
length: 14.4" (365mm)
width: 6.7" (170mm)
height: 5.6" (142mm)
Wheelbases: 8.3" (210mm), 8.8" (225mm), 9.4" (239mm)
Tread: 5.4" (138mm) center of wheels, side-to-side
Body;
length: 11.8" (300mm)
width: 5.7" (145mm)
height: 4.3" (110mm)

COMMENTS:

To paint body to match photo on box, use Tamiya PS-1 White (TAMR8601)
PS-2 Red (TAMR8602) and PS-5 Black (TAMR8605)
For Replacement or to Upgrade To Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 5x8mm Counter Gear 1 DTXC1523
1 5x11mm Counter Gear 1 DTXC1547
1 5x8mm Spur Gear 1 DTXC1523
1 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Output Shaft 1 DTXC1547
2 5x11mm Front Axles 1 DTXC1547
2 5x10mm Rear Axles 1 DTXC1535
jxs 02/21/11
ir/jxs
&