5000mAh 7.4V 2S 20C Reedy LiPo Battery Molex/Tamiya
Description
Molex type connector (Tamiya connector)
Balance connector
Durable case designed to protect battery
width: 1.8" (46mm)
height: 1.0" (25.4mm)
Weight: 9.4oz (265g)
Lead Wire Size: 14 AWG
Lead Wire length: 3.5" (82mm) approximate
Charge Rate: 5.0 Amps (1C)
Discharge Rate: 100 Amps
Max Volts Per Cell: 4.2V
Max Pack Voltage: 8.4V
Min. Discharge Volts: 6.0V
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
Charging
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
Manufacturer information
Associated prefers to deal direct with customers on questions of warranty and returns. Please contact Associated directly regarding such issues. All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
11.20 ounces
317.53 grams
0.70 pounds
Package dimensions
2.50 x 2.50 x 8.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️