Axle Carriers/Oversized Bearings Black:Revo/Slayer
Description
This is a set of optional RPM Axle Carriers/Steering Blocks
for the TRA Revo.
These will also work on the T/E Maxx 2.5R and 3.3 versions.
Wall thickness around the pillow-balls has been increased by 40%
eliminating split walls
Over 20% more material supports the pillow-balls, preventing them
from pulling through
Redesigned reinforcing rib supporting tie rod mount
Redesigned boot lock tabs for easier removal of the silicone boots
Press-fit bearings in the carrier for reduced axle movement
Two-piece pillow-ball set screws use aluminum and Delrin for the
ultimate in holding power under extreme situations
Two 12x21x5mm Inner Bearings
Two 6x15x5mm Outer Bearings
Four Aluminum Set Screws
Four Delrin Bushing Caps
Instruction Sheet
Replacement Pillow-Ball Set Screws, RPMC0800
Do not use the TRA #5356 Long Travel Rocker Arm Set with these
Axle Carriers. Doing so will void the RPM warranty.
jxs 11/23/05
ir/jxs
&
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
2.40 ounces
68.04 grams
0.15 pounds
Package dimensions
6.25 x 4.00 x 1.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️