This is the electric powered, radio controlled, 1/10 scale, on-road TA05-VDF Drifter Kit from Tamiya. Chassis: Carbon, 0.08" (2mm) thick with TA05 front and rear bulkheads VDF (vertical double frame) Drive: Four wheel belt drive with belt tensioner, front and rear univesal shafts Differentials: Front ball type, rear spool type Shocks: Oil-filled TRF, flourine coated case Spur Gears: Three plastic, 04 pitch 112, 120 and 128 tooth Pinion Gear: Metal 39 tooth Bumper: Front foam Battery Holder: Adjustable to accomodate NiCd, NiMH, LiPo and LiFe cells Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Parallel geometry system for excellent control of counter steering Tamiya TA05-VDF Drifter Kit, Shocks, Shock Oil, Decal Sheet, Foam Bumper and Instruction Manual Radio: 2-channel with high-speed steering servo Motor: 540 size designed for on-road racing ESC: Compatible with selected motor Body: Tamiya TA05 bodies will fit Tires and Wheels: Drift spec with 12mm hex Building and track equipment Finished size and weight not provided by manufacturer For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 10x15mm Direct Pulley 1 DTXC1595 2 5x8mm Ball Diff 1 DTXC1523 2 10x15mm Ball Diff 1 DTXC1595 2 4x8mm Center Shaft 1 DTXC1511 2 5x9mm Rear Belt Tensioner 1 DTXC1531 2 3x6mm Front Belt Tensioner 1 DTXC1503 4 5x10mm Rear Axles 2 DTXC1535 4 5x10mm Front Axles 2 DTXC1535 jxs 07/19/10 ir/jxs