|search||Shop by:||cars & trucks||just added||hot deals||vehicle||brand||category||Information:||dealers||shipping||policy||questions||contact|
|made by||part number||real-time inventory status||price|
|Tekno RC||TKR6851X|| 1 in Hollis warehouse
|M6 Front Driveshaft/Steering Block 6mm Slash Stampede|
The Tekno RC M6 Driveshafts and Steering Blocks will give your Slash 44 the ultimate in performance and durability.
If you are having issues with anything breaking this will most likely be caused by running the RPM A-Arms made from pure nylon. These arms are not compatible with our kit as they are too flexible. Because of this extreme flexibility, the metal parts of our kit are compromised during use. For this reason, we can only recommend using the stock Traxxas arms.
Custom 6mm stub axles no more bending or breaking
Bigger outer bearing for better load handling 6x12x4 (stock is 5x11x4 outer)
Hardened steel driveshafts and drive cups
Captured CV drive pin it cant fall out.
New M6 steering block design with additional bump-steer adjustments
Stock wheels and nuts fit with no mods
Metric hardware throughout
17mm adapter option (sold separately)
Screw pin from the original Traxxas output yoke (TRA6828X M3 screw pin)
When calling or writing, ask for TKR6851X 1 in Hollis warehouse
|Calling? Save time and ask for part number: TKR6851X|
|this product is made by: Tekno RC
10755 Scripps Poway Pkwy #598
San Diego, CA 92131
All content © 2018 Hobby Etc. Inc., 26 Clinton Dr, Hollis, New Hampshire 03049, USA
phone: 603-883-4919 HAVE PART NUMBERS READY! fax: 603-595-1498
Retail Store Hours: Monday through Saturday 8 AM to 5 PM (Eastern time zone)