This kit includes the iconic R33, fourth generation Nissan Skyline GT-R body which sit atop the TT02D chassis. The full size Nissan vehicle was 13cm longer than its R32 predecessor, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes.

- TT-02 Chassis Drift Version: Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (fitted to stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.
- 1/10 scale R/C model assembly kit
- Bathtub-type TT-02 shaft-driven 4WD chassis, compatible with TT-02 option parts
- Tamiya TBLE-02S ESC (capable of running 23T max brushed and 21.5T max brushless motors)
- Type 540 Sport-Tuned motor
- Aluminum motor heat sink
- Full shielded ball bearings
- Shaft driven 4WD
- Front/Rear 4-bevel resin differentials
- 4-wheel double wishbone suspension
- Front/Rear CVA oil shocks
- Clear polycarbonate body with decals and windowmasks
- Separately-molded side mirror and rear wing parts
- 24mm width drift-spec tires on mesh wheels
- 3-piece steering tie-rod
- One (1) car kit, as described
- Assembly
- Radio system (transmitter and receiver)
- Steering servo
- 7.2-7.4 volt battery pack & compatible charger
- Tamiya PS paint
- Scale: 1/10
- Construction Type: Assembly kit
- Terrain Use: On-Road
- Chassis Type: TT-02D
- Chassis Material: ABS plastic
- Body Material: Clear polycarbonate
- Bearings: Shielded ball bearing
- Differential Type: Gear
- Drive Type: Shaft, four wheel drive, axle dogbones
- Adjustable Gear Ratio: Yes
- Electronic Speed Control (ESC): TBLE-02 Capable of brushless & brushed motors (23T max Brushed, 21.5 max brushless)
- Motor: Sport-Tuned 540-brushed type
- Shock Damper: CVA oil-filled damper
- Steering: Bellcrank type
- Suspension: Fully independent double wishbone
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Bumper: Front, foam
- Tires: Slick rubber construction, Super Driftech 24mm wide
- Wheels: Silver colored mesh type, 1.9in diameter (48.2mm), 24mm wide, 12mm hex, +2 offset
- Gear Ratio: 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
- LED Light Buckets: No
- LED Lights: No

description revised by: SN October 9, 2019