This is the 1/10 scale, radio controlled, electric powered, ready to run Tamiya Kumamon Version Tractor For ages 14 and above From Tamiya's XB Pro Expert Built Series Kumamon is a character used to publicize the Japanese Prefecture of Kumamoto in Kyushu, an island in south Japan. Chassis: WR-02G monocoque with wheelie bar Drive: Rear wheel Radio System: Tamiya Finespec 2.4GHz pistol grip with steering and throttle trim and reverse and steering servo Electronic Speed Control: Tamiya TEU-105BK with reverse (TAMC5055) Motor: 540 brushed, preinstalled to assembled gearbox Suspension: Four wheel double wishbone Differential: Bevel gear Body: Painted polycarbonate, classic tractor style with instrument and body trim decals Driver Figure: Fully detailed injection molded painted plastic with movable head Shocks: Coil over plastic body friction, not oil-filled Wheels: White plastic Tires: Rubber, front; chevron tread, rear; chevron tread with spikes Steering: Direct servo with tie rods Front Bumper: Spring type to absorb minor impacts Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis RTR Tamiya Kumamon Tractor with brushed motor, ESC, painted body, 18T pinion gear, tires, wheels, shocks, decal sheet, 2.4GHz radio and instruction manual Battery: 7.2V stick pack with standard connector Battery Charger: To match selected battery AA batteries, paint, building and track equipment Vehicle- Length: 12.4" (315mm) Width: 9.9" (253mm) Height: 9.6" (244mm) Body- Length: 11.4" (290mm) Width: 7.8" (198mm) measured at rear fenders, widest point Height: 2.6" (66mm) To Upgrade to Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 5x11mm Rear Uprights 1 DTXC1547 4 5x11mm Front Uprights 2 DTXC1547 7 5x11mm Gearbox 4 DTXC1547 jxs 02/16/15 ir/jxs &