Product Features
*Brightest LEDs Industry Wide
*Dual Intensity Brake Light Action
*Simple & Easy Installation
*Powers Directly From the RX
*All Mounting Hardware Included
*Fast Body Removal Overview This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights! Use RCL5422E to add 2 3mm red LED lights to RPM Tail Light Canisters. OR Use RCL5422E to install 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channels for adding an additional brake light. EBS switch is included for dual-intensity brake light action, just like a real car. Compatible with RPM Tail Light Set RPM81030
Direct fit for Slash & SC10 Bumpers. To change tail lights to be 5mm in size use 5mm LEDs. Everything needed for a complete installation is included with every lighting system!

YOU WILL RECEIVE:

Instruction Set - (1) RX Direct2LED RCL5075 (1) electronic brake switch RCL5092 (2) 14" wire extensions RCL539014 (2) 3mm red tail lights RCL5280R (2) standard 3mm LED holders RCL50823 (2) 2P connector housings - (1) 3.75"x3" aluminum tape RCL5080 (4) zip ties & bases

SPECIFICATIONS:

SYSTEM CURRENT DRAW (@6V): 55mA (A standard servo draws approx. 350mA) RX Direct2LED INPUT VOLTAGE: 3.6-7.4V [6V Optimal] TYP OUTPUT CURRENT (per LED channel): 20-30mA Electronic Brake Switch INPUT VOLTAGE: 4.8-6.0V MAX OUTPUT CURRENT: 1.2A Blue, Green, White, White Strobe, Red Strobe LEDs FORWARD VOLTAGE: 3.2V MAX CURRENT: 30mA Amber, Red LEDs FORWARD VOLTAGE: 1.9V MAX CURRENT: 30mA
*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
*DO NOT look directly into beam.