Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

discontinued 911 Strobe 14 LED Controller

This part is discontinued and we no longer carry it.

Manufacturer

RC Lights logo

Part number

RCL5055

Real-time inventory

Out of stockClick to refresh

Price

$98.00
Sale -$33.01
$64.99

This part is discontinued and we no longer carry it.

Description

Product Features

*Full-function LED controller with headlight strobes, roof strobes, and dual-intensity electronic brake light action built right in
*Power directly from the RX or optional power source
Overview
The central point of every LED lighting system is the LED controller. It is this component that is going to appropriately power the LEDs so they do not get too much power and blow. It also separates the LEDs into independently controllable groups to which specific functionality can be assigned. It is the brain that tells the LEDs how and when to light. Directly power up to 14 LEDs. Current limiting resistors are built right in.  Using the 911STROBE™ 14 LED Controller, LEDs can be directly powered from the throttle channel of the RX using the included RX Pass-Thru™ (mini Y-harness).  With dual intensity brake light action is built right in! Throttle channel input fully reversible.  Fully-adjustable rate alternating roof strobe lights. Auxiliary channel input can be used to switch power ON/OFF to the entire unit from a 2-position switch on the TX or it can be used to turn the "lights" ON/OFF so that headlights are constant and strobes are OFF until the switch is flipped then the headlights strobe and the roof strobes turn on. LEDs are split into five banks: 4 constant/strobing headlights (2 each side R & L; headlight strobe rate fully-adjustable); 8 roof strobes (4 each side R & L; roof strobe rate fully-adjustable); and 2 switched dim or full bright depending on throttle stick position (GAS or BRAKE.) Throttle and auxiliary center-stick auto-detect for precise lighting effects every time.  Full-feature functionality built right in: headlight strobes, roof strobes, and dual intensity brake lights for the ultimate in scale lighting effects for any scale police / emergency vehicle body. Specs: DIMENSIONS: 1.65" x 1.0" x 0.25" INPUT VOLTAGE: 3.6-7.4V [6V Optimal] TYP OUTPUT CURRENT (per LED channel): 20-30mA Controller pins can be directly soldered to for DIY projects. Use heat shrink to insulate each pin.
*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
*DO NOT look directly into beam.

Manufacturer information

RC Lights logo

RC Lights

PO Box 1783

Boulder, CO 80306

https://www.rc-lights.com/

Additional details

Shipping weight

0.99 ounces

28.12 grams

0.06 pounds

Package dimensions

3.99 x 3.99 x 0.95

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️