*Brightest LEDs Industry Wide
*Simple & Easy Installation
*Powers Directly From the RX
*All Mounting Hardware Included
*Fast Body Removal
*Dual Intensity Brake Light Action
*Left & Right Turn Signals
*Headlight Strobe Built Right In Use RCL5014 to install 4 white dual headlights, 2 white fog lights, 4 amber adjustable rate turn signals, and 4 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car. No extra channels, with included TURNBRAKE™ - 14 LED controller. This controller has headlight strobe, turn signal, and EBS functionality built right in for a streamlined installation of a common setup for R/C cars & trucks. Powered directly from the RX throttle & steering channels using the included RX Pass-Thrus™. To change headlight or tail light colors use 5mm or 3mm LEDs. Everything needed for a complete installation is included with every lighting system! NOTE: TURNBRAKE™ 14 LED Controller is not compatible with the Remote Power Switch (RCL5090). Includes: Instruction Set - (1) TURNBRAKE™ 14 LED controller RCL5054 (2) RX Pass-Thru™                         RCL5074 (1) 4P Power Plug - (14) 14" wire extensions                 RCL539014 (6) 5mm white headlights & fogs     RCL5290W  (4) 5mm amber turn signal lights    RCL5290A (4) 5mm red tail lights                   RCL5290R (14) standard 5mm LED holders     RCL5082  (14) 2P connector housings - (1) 3.75"x3" aluminum tape           RCL5080 (14) zip ties & bases Specs: SYSTEM CURRENT DRAW (@6V): 120mA with brake lights dim, turn signals off; 250mA with all LEDs fully bright (A standard servo draws approx. 350mA) LED Controller INPUT VOLTAGE: 3.6-7.4V [6V Optimal] TYP OUTPUT CURRENT (per LED channel): 20-30mA DIMENSIONS: 1.65" x 1.0" x 0.25" Blue, Green, White, White Strobe, Red Strobe LEDs FORWARD VOLTAGE: 3.2V MAX CURRENT: 30mA Amber, Red LEDs FORWARD VOLTAGE: 1.9V MAX CURRENT: 30mA Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output. DO NOT look directly into beam.