Product Features
*Brightest LEDs Industry Wide
*Simple & Easy Installation
*Powers Directly From the RX
*All Mounting Hardware Included
*Fast Body Removal
*Dual Intensity Brake Light Action Overview Use RCL5006 to install 4 white dual headlights and 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car. No extra channels, with included microBRAKE - 6 LED controller. This controller has EBS functionality built right in for a streamlined installation on the most common setup for R/C cars & trucks. Powered directly from the RX throttle channel using the included RX Pass-Thru. To change headlight or tail light colors use 5mm or 3mm LEDs. Everything needed for a complete installation is included with every lighting system! microBRAKE 6 LED Controller is not compatible with the Remote Power Switch (RCL5090).

YOU WILL RECEIVE:

Instruction Set - (1) microBRAKE 6 LED controller RCL5052 (1) RX Pass-Thru w/ 3P power plug RCL5074 (6) 14" wire extensions RCL539014 (4) 5mm white headlights RCL5290W (2) 5mm red tail lights RCL5290R (6) standard 5mm LED holders RCL5082 (6) 2P connector housings - (1) 3.75"x3" aluminum tape RCL5080 (6) zip ties & bases

SPECIFICATIONS:

SYSTEM CURRENT DRAW (@6V): 90mA with brake lights dim; 120mA with all LEDs fully bright (A standard servo draws approx. 350mA) LED Controller INPUT VOLTAGE: 3.6-7.4V [6V Optimal] TYP OUTPUT CURRENT (per LED channel): 20-30mA 1.3" x 0.6" x 0.3" Blue, Green, White, White Strobe, Red Strobe LEDs FORWARD VOLTAGE: 3.2V MAX CURRENT: 30mA Amber, Red LEDs FORWARD VOLTAGE: 1.9V MAX CURRENT: 30mA