discontinued Pro Glow Plug Ignitor w/AC Charger
This part is discontinued and we no longer carry it.
Manufacturer
Part number
HPI74108
Real-time inventory
Out of stock
Price
This part is discontinued and we no longer carry it.
Description
HPI Racing brand Glow Plug Igniter with Cap Meter and AC Charger from HPI Racing.
The glow starter is used to heat a glow plug while starting an engine.
FEATURES:
Hot pink machined and knurled aluminum battery holder.
NiCd cell provides higher voltage under a load than an alkaline cell.
Meter has green area for charged and red area for must recharge.
Spring-loaded locking socket design.
Comes on a picture instruction header card.
YOU WILL RECEIVE:
One Glow Starter with Cap Volt Meter.
One Panasonic 1.2volt, 1300mAh sub-C size NiCd Battery
One AC Charger (United States Standard)
REQUIREMENTS:
Charging of NiCd battery for ten hours before use.
SPECIFICATIONS:
Adaptor Input: AC 120V~60Hz 2W (United States Standard)
Adaptor Output: DC 1.25V at 170mA
Shaft Length: 2-1/4 (57mm)
COMMENTS
Battery for this glow-starter can be replaced with another sub-C
type battery by unscrewing the battery holder.
dew 11/18/00
ir/jl
Manufacturer information
HPI Racing assumes responsibility for it products and will repair or replace any defective product at its sole discretion. HPI believes it is solely responsible for its products, therefore, Hobby Etc., Inc. will not be involved in any replacements. Please contact HPI directly.<br><br>Contact HPI Customer Service for any product related problems at 949-753-1099. HPI Customer Service hours are Monday - Friday 8:00 to 4:30 PST. The HPI website, www.hpiracing.com, has information and frequently asked questions about HPI products.
Additional details
Shipping weight
10.56 ounces
299.39 grams
0.66 pounds
Package dimensions
7.88 x 4.75 x 2.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️