Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

discontinued AR102663 1/10 GRANITE VOLTAGE MEGA 2WD RTR Rd/Blk

This part is discontinued and we no longer carry it.

Manufacturer

Arrma logo

Part number

ARAD09RL

Real-time inventory

Out of stockClick to refresh

Price

$205.79
Sale -$65.80
$139.99

This part is discontinued and we no longer carry it.

Description


FEATURES:

Chassis: Molded plastic, split line monocoque style, gray in color, incorporates front and rear shock towers, gearbox, motor mount and upper suspension mounts, mid motor chassis design protects motor from dirt and water
Drive: Rear wheel
Transmission: Molded composite gears
Differential: Ball bearing equipped, straight cut metal gears, diff lubed with grease, manufacturer does not specify viscosity
Spur Gear: 48 pitch 93 tooth plastic
Pinion Gear: 48 pitch 16 tooth metal
Suspension: Double wishbone front and rear, adjustable ride height
Radio: Arrma ATX-101 with dual rate steering, throttle end points throttle and steering trims
Steering Servo: ADS-5 waterproof case, 70oz/in (5kg-cm) of torque, 25T spline
Motor: Brush equipped, MEGA 20 turn, 540 size three motor mounting positions to allow the use of three pinion sizes
Electronic Speed Control: 3-in-1 SRS combines ESC, receiver and electronic control for the servo (standard 3-wire servo can also be plugged into the unit if driver wants to use a different servo) SRS unit is compatible with 2S LiPo, 2-6 cell Li-Ion, & 6-cell NiMh batteries, battery types switchable with jumper, 2-stage low- voltage cutoff for LiPo, Li-Ion, and single stage cutoff for NiMh batteries
Shocks: Oil-filled at factory with 350cst mineral base shock oil, equivalent to around 30wt shock oil from other manufacturers
Steering: Fixed links with servo saver
Battery: Two INR18650P button top Li-Ion cells are included, up to six Li-Ion cells can be used for longer run times, for extra Li-Ion cells order ARAC2910 or ARAP2950. Optional 6 call charger ARAP2000 can be purchased separately to charge multiple Li-Ion batteries and decrease your wait time between runs. Click on Accessories Needed link to show optional NiMh and LiPo battery choices. Battery Charger: 110V wall type
Battery Tray: Holds up to six Li-Ion 18650 cells, 2S LiPo pack or 6-cell NiMh stick pack, side loading design-battery is held in place by pivoting door on chassis-no pins or clips to lose, integrated T-plug provides connection to SRS unit when using lithium ion cells, maximum battery dimensions are 5.55 x 1.89 x 1.02 inch (141 x 48 x 26mm)
Body: Trimmed and printed
Wheels: Seven spoke desert truck style wheels, black in color, 12mm hex, nylon construction, bead diameter 2.81 inch (71.5mm)
Tires: dBoots Copperhead MT monster truck, width: 2.8 inch (71mm), outer diameter 5.12 inch (130mm)
Caster: Non-adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Non-Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Warranty: Two year limited warranty beginning at date of purchase
YOU WILL RECEIVE:

Assembled Granite Voltage Mega SRS Monster Truck with Radio, 3-in-1 SRS Unit, Trimmed Body, Charger, Instruction Manual and two Li-Ion Cells
REQUIREMENTS:

AA Batteries: Four for transmitter
Track and maintenance equipment
SPECIFICATIONS:

Vehicle;
length: 16.5 inch (418mm)
width: 13.4 inch (340mm)
height: 7.4 inch (188mm)
Weight: 3.8lbs (1.75kg) with supplied battery
Wheelbase: 11.22 inch (285mm)
Ground Clearance: 1.61 inch (41mm)
Front and Rear Shock Spring Rate: 86gf/mm
Standard Final Gear Ratio: 15.11 Body;
length: 15.9 inch (404mm)
width: 5.5 inch (139mm) at front wheels, narrowest point 6.7 inch (170mm) at rear wheels, widest point
height: 4.3 inch (110mm)
COMMENTS:

Available in the following color schemes; Blue and Black, ARAD09BL Red and Black, ARAD09RL
For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set 2 6x11x4mm Fr Hubs1 ARAC3210 2 5x10x4mm Fr Hubs1 ARAC3200 2 6x11x4mm Rear Hubs 1 ARAC3210 2 5x10x4mm Rear Hubs 1 ARAC3200 2 6x11x4mm Diff & Idler Gear 1 ARAC3210 2 10x15x4mm Diff & Idler Gear 1 ARAC3202
description revised by: DB May 24, 2018

Manufacturer information

Arrma logo

Arrma

3002 N. APOLLO DRIVE, SUITE #1

CHAMPAIGN, IL

https://www.arrma-rc.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

ARAD09**
5052127026765

Additional details

Shipping weight

73.79 ounces

2091.97 grams

4.61 pounds

Package dimensions

17.10 x 14.05 x 8.00

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️