Arrma brand Arrma brushless Electric Powered, 2.4GHz Radio Controlled
1/8 scale RTR Raider XL BLX Desert Buggy without Battery.

Chassis: alum front chassis plate, batteries fit under chassis-no
need to remove body to change batteries, quick release battery
tray
Drive: Rear wheel with steel driveshafts and axles
Motor: 4-pole 3800kV brushless, 540 size
Motor Mount: Composite
Motor and ESC: Arrma BLX85 brushless power system with 60A ESC,
4-pole 3800Kv 540 size brushless motor
Radio: Tactic TTX300 with TR326 3-Channel SLT HV receiver
Steering Servo: Arrma ADS-7M, 97 oz/in (7 kg/cm) torque @ 7.2V,
waterproof and dustproof, dual ball bearings and metal gears
Receiver Box: Waterproof and dust proof
Body: Trimmed and painted polycarbonate body, black plastic wing
Transmission: Composite gears, brushless ready
Slipper Clutch: Adjustable for different track conditions
Suspension: Fully independent
Differential: Metal gear, oil filled
Shocks: Composite body oil-filled
Tires: dBoots, aggressive off-road pattern with hard wearing foam
inserts
Wheels: Six spoke with black chrome finish
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Steering: Bellcrank type with servo saver
Warranty: Two year limited beginning at date of purchase

RTR Raider XL BLX Buggy with Painted Body and 2.4GHz Radio, ESC,
Steering Servo, brushless Motor, Tires, Wheels, Foam Inserts,
Instruction Manual

AA Batteries: Four for transmitter
Battery: 2S or 3S LiPo battery or 6 or 7 cell NiMh stick pack
Battery Charger: For selected battery
Track and maintenance equipment

Vehicle-
length: 18.31 (465mm)
Front width: 11.42 (290mm)
Rear width: 11.81 (300mm)
height: 6.06 (154mm)
Wheelbase: 12.99 (330mm)
Weight: 3lbs 15oz (1.79kg) without battery
Maximum Battery

7.87 x 1.89 x 1.06 (200 x 48 x 27mm)
Body-
length: 11.3 (287mm)
width: 5.7 (146mm)
height: 3.0 (75mm)
COMMENTS
For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 15x21mm F & R Inner Hubs 1 ARAC3162
2 8x16mm F & R Inner Hubs 1 ARAC3156
2 5x10mm Idler Gear 1 ARAC3200
2 5x10mm Input Shaft 1 ARAC3200
2 10x15mm Diff Gear 1 ARAC3202
jxs 09/30/16