This is the 1/10 scale electric powered, radio controlled, ready to run
HPI E10 on-road Toyota Sprinter Trueno Drift Car.

Chassis: Bathtub type 0.078" (2mm) thick with quick change battery
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-1 AM pistol grip radio system with RF-1 receiver, SF-
1 steering servo
Electronic Speed Control: EN-1 with reverse
Motor HPI Saturn 27T 540 size, HPIC1144
Charger: AC wall type
Battery: 7.2V
Shocks: Composite bodied
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed
Tires: T-Drift 2.48"(63mm) diameter, 1.02" (26mm) wide
Wheels: Six spoke, chrome Gram Lights 57S-Pro
2.08" (53mm) diameter, 1.02" (26mm) wide
Bumpers: Front, foam
Body: Pre-painted Toyota Sprinter Trueno, adjustable body mounts
to accomodate a large variety of touring car bodies
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver

HPI E10 on-road Toyota Sprinter Trueno Drift Car with painted
body, radio, ESC, battery, charger, wheels, tires, 27T motor
and manual _

Radio Batteries: (8) AA size
Misc. Items: Building and track equipment

VEHICLE-
Length: 14.8" (375mm)
Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm)
Height: 4.25" (107.95mm)
Weight: 2.8 lbs (1270g) without body
Wheelbase: 10" (255mm)
Drive Ratio: 7.48:1
Tread: Front and rear-6.25" (158.75mm)(side-to-side at wheel centers)
Front Track: 7.25" (184.15mm)
Rear Track: 7.25" (184.15mm)
Spur Gear: 65T
Tires- Front and rear: 2.48" x 1.02" (63x26mm)
BODY-
Length: 17.25" (438.15mm)
Width: 7.75" (196.85mm) at rear wheels (widest point)
7.5" (190.5mm) behind from wheels (thinnest point)
Height: 4.75" (107.95mm)

For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
2 12x18x14 Center drive shaft DTXC1597 1

Body pictured on the box is painted red
For the assembled version without battery or radio, order HPIC2761.

jxs 10/02/07
tlw 10/04/07
ir/jxs
 


When calling or writing, ask for HPI10703 2 in stock