This is the 1/10 scale electric powered, radio controlled, ready to run
HPI E10 on-road Mazda RX-7 Drift Car.

Chassis: Bathtub type .78 (20mm) thick with quick change battery
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-1 AM pistol grip radio system with RF-1 receiver, SF-
1 steering servo
Electronic Speed Control: EN-1 with reverse
Motor HPI Saturn 27T 540 size, HPIC1144
Charger: AC wall type
Battery: 7.2V
Shocks: Plastic
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed
Tires: T-Drift 2.48 (63mm) diameter, 1.02 (26mm) wide
Wheels: Six spoke, chrome Gram Lights 57S-Pro
2.08 (53mm) diameter, 1.02 (26mm) wide
Bumpers: Front, foam
Body: Pre-painted Mazda RX-7, adjustable body mounts
to accomodate a large variety of touring car bodies
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver

HPI E10 on-road Mazda RX-7 Drift Car with painted
body, radio, ESC, battery, charger, wheels, tires, 27T motor
and manual _

Radio Batteries: (8) AA size
Misc. Items: Building and track equipment

VEHICLE-
length: 14.8 (375mm)
Width, Adjustable: 7.32, 7.56, 7.80 (186, 192, 198mm)
height: 4.25 (107.95mm)
Weight: 2.8 lbs (1270g) without body
Wheelbase: 10 (255mm)
Drive Ratio: 7.48:1
Tread: Front and rear 6.25 (158.75mm)(side-to-side at wheel centers)
Front Track: 7.25 (184.15mm)
Rear Track: 7.25 (184.15mm)
Spur Gear: 65T
Tires- Front and rear: 2.48 x 1.02 (63x26mm)
BODY-
length: 17.75 (450.85mm)
width: 7.75 (196.85mm) at rear wheels (widest point)
7.5 (190.5mm) behind from wheels (thinnest point)
height: 4.25 (107.95mm)

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 12x18x14 Center drive shaft 1

When calling or writing, ask for HPI10702 in stock - one left